<< Click to Display Table of Contents >> Navigation: Wadiso 6 User Guide > Time/Water quality simulation > Saving, Opening and Clearing Time/WQ Simulation Data > New Time/WQ Simulation Data |
Selecting Simulation Data > New Simulation Data clears all the time/WQ simulation data from the program memory. The user is prompted with a warning to this effect, prior to the execution of the procedure.
Both system-specific time/WQ simulation parameters, and time/WQ simulation-specific parameters, are cleared and replaced by default values. The default values are:
•Time/WQ Simulation-Specific Parameters:
oTimes Settings
▪Duration = 24.0 hours
▪Hydraulic Time Step = 1.0 hour
▪Pattern Time Step = 1.0 hour
▪Quality Time Step = 0.1 hour
▪Rules Time Step = 0.1 hour
▪Report Time Step = 1.0 hour
▪Pattern Start Time = 0.0 hours
▪Report Start Time = 0.0 hours
▪Clock Time at Start = 00:00 (12 pm)
oQuality Settings
▪Type = None
▪Chemical Name = NONE/BLANK
▪Trace Node = NONE/BLANK
▪Relative Diffusivity = 1.0
▪Quality Tolerance = 0.01
oReactions Settings
▪Bulk Reaction Order = 1.0
▪Wall Reaction Order = 1.0
▪Tank Reaction Order = 1.0
▪Limiting Concentration = 0.0
▪Wall Roughness Correlation = 0.0
oEnergy Settings
▪Pump Efficiency = 75%
▪Energy Price = 0.0 / kWh
▪Demand Charge = 0.0 / max kW usage
▪Price Time Pattern No = 0
oTime Patterns: None
oFire Flows: None
oLink Controls: None
oWater Quality of Sources: None
•System-Specific Time/WQ Simulation Data:
oThe system-specific time/WQ simulation data, i.e. time/WQ simulation fields in the Pipes/CVs, Pumps, Valves, Nodes, and Tanks (and Reservoirs) tables, remain unaffected by the Simulation Data > New Simulation Data operation.